Linear MCS109920 Multi Code 1 Channel 110V Gate Receiver

Details

Linear MCS109920 Multi Code 1 Channel 110V Gate Receiver

The Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. If the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing, an external Model 106603 Remote Whip Antenna should be used.

The receiver includes a 24-volt AC power transformer that plugs directly into a 115 VAC power outlet. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.

The receiver is programmed with a 10-position coding switch. When a Multi-Code transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.

The Model 109920 is compatible with 300 MHz Multi-Code transmitters only.

Features

• Operates on 115 VAC power
• One channel
• Whip antenna
• Codes: 1,024 (set by dip switches)
• RF frequency: 300 MHz
• Dimensions: 3.625" W x 5.25" H x 1.5" D