Linear AM-CRI Card Reader Interface - ACP00717

Details

Linear AM-CRI Card Reader Interface - ACP00717

The Linear AM-CRI Card Reader Interface is designed for use with Linear's Access Control Systems. The interface will support one or two 26-bit or 31-bit Wiegand input devices. If the readers used have a hold or buffer connection, two readers may be used to the AM-CRI. If the readers do not have a hold or buffer connection, one reader may be used with the AM-CRI. Usually mounted near the readers, the AM-CRI interface connects to the control unit through a PBUS cable. Each reader connects to the AM-CRI through a six-wire (one LED in reader) or seven wire (two LEDs in reader) cable.

Features:

• Dimensions: 4.45" W x 5.75" H x 1.5" D
• Connects With A Six-Wire Or Seven-Wire Cable
• Power Supplied By System Controller
• Used For Equipping A Linear Access Control System
• Used With Up To Two 26, 30, or 31-Bit Wiegand Input Devices
• Powered Supplied By System Controller Or External Source For Locally Powered Readers

View Manual