Linear MGR-2 DNR00105 / DNR00072 2 Channel 318MHz Megacode Gate Receiver (12-24V)
Details
Linear MGR-2 DNR00105 / DNR00072 2 Channel 318MHz Megacode Gate Receiver (12-24V)
12 30 volt, two channel, gate receiver, two form "A" relay outputs, wire leads for power and output connections, Type "F" connector for local or remote antenna, 9 inch local antenna with three foot cable and bulkhead connector included, 40 code capacity, MegaCode format, 318 MHz
The MGR-2 is a 2-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The MGR-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the MegaCode radio format with over a million possible code combinations. Up to 40 transmitters can be programmed into the receiver.
Features
- Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
- Supplied with whip antenna, three feet of coaxial cable, and bulkhead connector
- Memory: storage for up to 40 MegaCode transmitters
- Power: 12 - 30 VAC or 10.5 - 30 VDC
- Codes: 1,000,000+ (MegaCode format)
- RF frequency: 318 MHz
- Dimensions: 3.625" W x 5.25" H x 1.5" D
| SKU | DNR00105 |
|---|---|
| Type | Megacode |
| UPC Code | 93863111617 |
| Manufacturer | Nortek / Linear LLC / Linear PRO Access / OSCO GATE |
| Frequency | 318 Mhz |
| Model Number | MGR-2 |
| Condition | New |
| Voltage | 12-30 AC/DC |